Titanium Alloys Plate Gr5 Ti6Al4V Eli ya nemi kayan aikin tiyata
Siffofin
| Kayan abu | Ti-6Al-4V ELI;Gr23;Gr5 |
| Daidaitawa | ASTM F136, IS05832-3 |
| Girman | (1.2 ~ 20) T * (300 ~ 500) W * (1000 ~ 1200) L mm |
| Hakuri mai kauri | 0.08-0.8mm |
| Jiha | M, Anneal |
| Surface | goge ko tsinke |
| Tashin hankali | Ra≤3.2um ( goge) |
Binciken Samfura
1. Tare da takardar shaidar gwajin niƙa, karɓi gwajin ɓangare na uku.
2. 100% ultrasonic ko turbine gano lahani don kawar da lahani na ƙarfe da ƙazanta marasa ƙarfe.
3. Halaye: Barga na jiki Properties, metallographic tsarin ne mafi alhẽri daga daidaitattun bukatun, high ƙarfi ko high plasticity za a iya musamman.
Ƙayyadaddun bayanai
| Abubuwan sinadaran | ||||||||
| Daraja | Ti | Al | V | Fe, max | C, max | N, max | H, max | O, max |
| Ti-6Al-4V ELI/Gr23 | Bal | 5.5 ~ 6.5 | 3.5 ~ 4.5 | 0.25 | 0.08 | 0.05 | 0.012 | 0.13 |
| Gr5 | Bal | 5.5 ~ 6.5 | 3.5 ~ 4.5 | 0.30 | 0.08 | 0.05 | 0.015 | 0.20 |
| Kayan aikin injiniya | ||||
| Daraja | Ƙarfin Tensile (Rm/Mpa) ≥ | Ƙarfin Haɓaka (Rp0.2/Mpa) ≥ | Tsawaitawa (A%) ≥ | Rage Wuri (Z%) ≥ |
| Ti-6Al-4V ELI/Gr23 | 860 | 795 | 10 | 25 |
| Gr5 | 860 | 795 | 8 | 20 |
XINNUO yana samar da farantin titanium na likitanci tare da 650 Rolling Mill, don sarrafa kauri haƙuri, madaidaiciya da microstructure mafi kyau.Abubuwan da muke samarwa na shekara-shekara na farantin titanium na likita shine ton 300.Alama lambar zafi, daraja, girman da jagorar mirgina akan zanen gado.
Mun kware wajen samar da farantin titanium na likitanci.Kayan ASTM F136 yana da ƙarancin ƙima amma kyawawan kaddarorin, ana amfani dashi sosai don farantin kwanyar, farantin gyaran ƙashi na ciki da kayan aikin likita.Muna ɗaukar inganci a matsayin abu mai mahimmanci na farko yayin samarwa da ingantaccen tsari.
A halin yanzu, mun zama ɗaya daga cikin manyan masu samar da sandunan titanium na likitanci zuwa masana'antun dasa shuki na kasar Sin.XINNO shine ISO 13485: 2016 da ISO 9001: 2015 bokan.
