008615129504491
1.Taqaitaccen gabatarwa
| Daraja | Gr5, Ti-6Al-4V ELI |
| Daidaitawa | ISO5832-3, ASTM F136 |
| Diamita | 1-4 mm |
| Ƙarfin ƙarfi | > 1080MPa |
| Siffar | Waya madaidaiciya |
| Halaye | Tsayin saman≤0.8µm |
| Aikace-aikace | Kirschner waya, na roba intramedullary ƙusa |
| Takaddun shaida | Rahoton gwaji, rahoton gwaji na ɓangare na uku |
2.Hanyoyin sunadarais
| Daraja | Ti | Abubuwan sinadaran | ||||||
|
| ||||||||
| Babban abun da ke ciki | Najasa(=<%) | |||||||
| Al | V | Fe | C | N | H | O | ||
| Ti-6Al-4V ELI | Bal | 5.5-6.5 | 3.5-4.5 | 0.25 | 0.08 | 0.05 | 0.012 | 0.13 |
| Gr5 | Bal | 5.5-6.75 | 3.5-4.5 | 0.3 | 0.08 | 0.05 | 0.015 | 0.2 |
3. Kayan aikin injiniya
| Kayan abu | Matsayi | Diamita | Ƙarfin ɗaure (Rm/Mpa) | Samar da ƙarfin haɓaka mara daidaituwa (Rp0.2/MPa) | Tsawaita A/% | Rage yanki Z/% |
| Ti-6Al-4V ELI | M | 1-4mm | ≥860 | ≥795 | ≥10 | / |
| Gr5 | M | 1-4mm | ≥860 | ≥780 | ≥10 | / |
4. Amfani da waya titanium na likitanci
High tensile ƙarfi titanium alloy waya ana amfani da Kirschner waya (K waya), wanda aka yi amfani da gyara na kashi karaya, sake gina kashi, da kuma matsayin jagora fil don shigar da sauran implant.Yana da high ductility.
Kamfaninmu yana binciken wannan samfurin kamar yadda abokin ciniki da buƙatun kasuwa shekaru 10 da suka gabata, kuma bayanin amfani yana da kyau.Muna da fasahar samar da balagagge akansa.
5.Abin da ya sa ka zabi mu kamfanin
1) Sarrafa ingancin kayan daga farkon zuwa kowane tsari na samarwa, yi amfani da soso titanium mai daraja 0, narke titanium ingot ta Jamus ALD injin narkewa.
2) Sashen R&D yana tallafawa akan buƙatun abokan ciniki da sabbin buƙatu.
3) ISO 13485, ISO 9001 da AS 9100D bokan
4) Muna da injin zane 5 da injin zane 2 sanyi don samar da waya
5) 100% ganowa da bayar da rahoton gwajin
6) Kyakkyawan bayan sabis na tallace-tallace
Don ƙarin bayani game da kayanmu ko kamfaninmu, da fatan za a iya tuntuɓar mu.
